Laminates for industrial thermal insulation are made from alkali free alumina borosilicate E-glass fibre yarns. For the production of laminates for thermal insulation the yarns used have a filament diameter of 6 and 9 µm.
Application: typical applications are tube, wire and cable insulation, insulation for the automotive industry as well as personal protective equipment. Application features from laminating: media-tight, gas-tight, resistant to abrasion and buckling, high thermal radiation reflection capability.
Parameters:
- mass per unit area 200 to 780 g/m²;
- coating: laminated with metallized Polyester foil or Aluminum foil; One sided or double sided laminated in combination with high temperature; self-adhesive; options for additional one side coating with Polyurethane or Silicone.
Designation: e.g. TG-200-AL, where:
TG - type (technical fabric),
200 - mass per unit area of raw material, g/m²,
AL - aluminum foil (18 µm and other µm upon request).
Other options:
GT - type (texturized fabric),
GW - type (glass wire reinforced fabric),
AL - type (aluminum foil,12 µm),
MPF - type (metalized polyester foil, 25µm),
SS - Silicone Premium,
SH - Silicone Industrial,
PU - Polyurethane Premium,
PH - Polyurethane Industrial,
PSA - High Temperature Pressure Sensitive Adhesive,
G - colour (grey),
W - colour (white),
1 - one side coated or laminated,
2 - double side coated or laminated / or combinations.
HR-glass (High-Resist glass) is alkali-free aluminosilicate glass that does not contain boron oxide. This glass type could fully substitute E-glass in various aspects. The most important feature of this type of glass is its heat resistance of up to 800°C.
Advantages of HR-glass fibre compared to E-glass:
- higher chemical resistance, particularly in alkaline and water environments;
- higher heat resistance;
- environmentally friendlier glass melting process - does not create dust emissions containing boron oxide.
Designation: e.g. HRTG-400-MPF-1, where "HR" means glass type, TG - technical fabric; 400 - mass per unit area of raw material, g/m²; MPF - metalized polyester foil (25µm); 1 - one side coated or laminated.
Other options: GT - texturized fabric; GW - steel wire reinforced; AL - aluminum foil (18µm and other µm upon request); SI – Silicone Premium; SH - Silicone Industrial; PU – Polyurethane Premium; PH - Polyurethane Industrial; PSA - High Temperature Pressure Sensitive Adhesive; G – grey; W – white; 1 - one side coated or laminated; 2 - double side laminated / or combinations.
Application: Silica materials’ high melting point (1250°C) means an optimal range of industrial applications where extreme heat is used. Application features from laminating: media-tight, gas-tight, resistant to abrasion and buckling, high thermal radiation reflection capability.
Designation: e.g. KA-600-AL-1, where:
KA - type (high silica fabric),
600 - mass per unit area of raw material, g/m²,
AL - aluminum foil 12 µm,
1 - one side laminated.
Other options:
GW - type (glass wire reinforced fabric),
AL - type (aluminum foil,18 µm),
MPF - type (metalized polyester foil, 25 µm),
SS - Silicone Premium,
SH - Silicone Industrial,
PU - Polyurethane Premium,
PH - Polyurethane Industrial,
PSA - High Temperature Pressure Sensitive Adhesive,
G - colour (grey),
W - colour (white),
2 - double side coated or laminated / or combinations.
